Latest Scrap Kits Released, Ptu and Free.
More info available at my blog: http://disyasdigitalsdesigns.blogspot.com

Pages

Latest Kit Released! Ptu and Free

viernes, 1 de octubre de 2010

Christmas on July made with my FTU Kit - English

This tutorial was writen by me: Dilcia aka DisyasDD, on September 26, 2010 from
my own ideas. Any resemblance to other tutorials is purely coincidental.
You may use this tutorial for personal use only.

To make this tutorial, you will not need any filter. Was made in PSP XI, but you could use with other versions.

Needed Supplies:

Disyas_COJ_FR4
Disyas_COJ_G1
Disyas_COJ_P4
Disyas_COJ_Tag1
Disyas_COJ_TB2
Tube of your choice


Note:
This materials are from my FTU kit "Christmas on July".
You can find it in Blog Trains sections in my blog:
http://disyasdigitalsdesigns.blogspot.com

The tube that i used is from the Artist Jennifer Janesko, called "The Gift",
you can buy it at: http://www.cilm.com
Please, dont forget to write in your tag your license number.

Let's go!!!


Step 1

Open a new canvas, 600x600, transparent, 72pp resolution.

Step 2

Open Disyas_COJ_P4
Go to Edit/Copy - Now you can close Disyas_COJ_P4
Go back to your canvas
Selections/Select All
Edit/Paste into the Selection
Deselect

Step 3

Let's go to apply some mask, use a default mask from PSP,
To do that, go to Layers/Load mask from disk
Choose a mask that you like and use the next settings:



You will see in your Layers Palette a group with your mask, we need to merge this group, so go to Layers/Merge group.

Step 4

Open Disyas_COJ_FR4
Go to Edition/Copy
Go back to your canvas
Edit/Paste as new layer

We will rotate the frame to the left:
So go to Image, Free Rotate/Left/25º


Step 5

We will apply shadow to the frame, go to:
Effects/3D Effects/Shadow
We will use the next configuration:
1,1,50,10, Black, Shadow in new layer not selected

We will apply shadow again, just change the configuration for the next:
-1, -1, 50, 10, Black, Shadow in new layer not selected


Step 6

Open the Jennifer Janesko tube or the tube of your choice.
We will reduce the size of the tube 70 percent.
Go to Image/Resize/70%

Use the next configuration:

Edit/Copy
go to your canvas
Edition/Paste as new layer
Now you can close your tube, don't save changes.


Step 7

We will rotate the image in the same orientation of the frame, so we will use the same configuration that you used in the Step 4.
Go to Layers/Organize/Move Down

With your Move Tool, move the tube and place it as you can see in the image preview.


Step 8 - Optional

Note: If the corner of the tube goes out of the frame, with our Erase Tool we will need to erase this part. Use in your Erase Tool the next configuration:
Circle, Size 32, Strength 100, Density 100, Opacity 100,
Sharp 100


Step 9

Open:

Disyas_COJ_TB2
Disyas_COJ_G1

Open Disyas_COJ_G1, go to Edition/Copy
Go back to the canvaz and go to the frame layer
Edit / Paste as new layer

Resize the gift 80% percent:
Image/Resize with the next settings:


With the Move Tool, put the gift in the place that you can see in the image.

Step 10

Open Disyas_COJ_TB2,
Edit/Copy.
Go to your canvas
Edition/ Paste as new layer

We will resize the Teddy Bear, you can use the same settings that we use with the gift in the Step 9.

Move the Teddy Bear back of the gift, go to
Layers/Organize/Send to Back

With your Move Tool, move the Teddy Bear to the position that you can see in the image.

Step 11

Apply shadow to the Teddy Bear and the Gift with the same settings used before in the Step 5.


Step 12

Open Disyas_COJ_Tag1
Edit/Copy
Go to your canvas
Edit/Paste as new layer

We will need to rotate the tag as we do with the frame and the tube.
Use the same settings that we use in the Step 4, just we will rotate 35º this time.

After that, apply shadow with the same settings used before.

Step 13

Now, add the text:

"Merry Christmas"

Set your foreground with the color: #f6ed8e
Set your background with the color: #961218

With you Text Tool and the next settings, write: "Merry Christmas":

font: Brush Script
Size: 54
Style: Bold
Aling : center
Stroke: 1


Note: You can choose other font. Depending the font of your choice, the settings could change.

After you write your text, go to the text layer, right click over the layer and select Rasterize.
We will rotate the Text using the settings that we use to rotate the frame.


Step 14

We will apply some shadow to the font, we will use the settings that we use in the Step 4.

We will apply some bevel in the Text too:
Effects/3D Effects/Inner Bevel
with the next settings:


Step 15

To finis this tutorial add your cilm license number to your tag and your name too.
I hope that you have enjoyed this tutorial as i did.

Christmas on July - Tutorial with FTU Kit

Esta leccion fue escrita por mi, Dilcia aka DisyasDD, el 26 de
septiembre de 2010, con mis propias ideas. Cualquier parecido con algun otro tutorial es mera coincidencia.

Para realizar este tutorial, no requerirás ningun
filtro externo. Fue realizado en PSP XI, pero
podría hacerse en cualquier otra version.

Materiales necesarios:

Disyas_COJ_FR4
Disyas_COJ_G1
Disyas_COJ_P4
Disyas_COJ_Tag1
Disyas_COJ_TB2
Tube de tu elección


Notas:
Estos materiales forman parte de un kit gratuito
elaborado por mi, que se titula "Christmas on July".
Puedes encontrarlo en mi blog en la sección de blog trains:
http://disyasdigitalsdesigns.blogspot.com

El tube que yo utilicé es un tube de la Artista
Jennifer Janesko, titulado "The Gift",
puedes comprarlo en: http://www.cilm.com
No olvides colocar en tu trabajo tu numero de licencia.

Bien, empecemos!!!


Paso 1

Abre un lienzo de 600x600, transparente, a 72pp de resolución.




Paso 2

Abre el papel Disyas_COJ_P4
Ve a Edicion/Copiar - Cierra el papel
Regresaremos a nuestro lienzo
Ve a Selecciones, Seleccionar Todo
Ve a Edicion/Pegar en la Seleccion
Anular Seleccion

Paso 3
Vamos a aplicar una mascara predefinida de PSP,
para ello, iremos a Capas/Cargar o guardar mascara/Cargar mascara de disco
Una vez que elijas tu mascara de entre las disponibles,
usa los siguientes ajustes:

Crear mascara con: Luminosidad de origen - seleccionado
Orientacion: Ajustar a lienzo - seleccionado
Opcions: Ocultar todas las mascaras - seleccionado




Verás que se ha creado un grupo de capas con tu mascara,
necesitamos fusionarlas, para ello iremos
al menú Capas, Fusionar Grupo.

Paso 4

Abre el Disyas_COJ_FR4
Ve a Edicion/Copiar
Regresaremos a nuestro lienzo
Edicion/Pegar como nueva capa

Rotaremos nuestro frame a la izquierda:
Iremos a Imagen/Rotacion libre
Usaremos los valores siguientes:

Dirección: Izquierda
Grados:
Libre : 25º


Paso 5

Aplicaremos un poco de sombra a nuestro frame de
caramelos, para ello, iremos al menu
Efectos/Efectos 3D/Sombra
Usaremos los siguientes valores:
1,1,50,10, Negro, Sombra en nueva capa sin seleccionar

Aplicaremos nuevamente la sombra, solo
que en esta ocasion los valores serán:
-1, -1, 50, 10, Negro, Sombra en nueva capa sin seleccionar


Paso 6

Ahora abriremos nuestro tube de Jennifer Janesko.
Cambiaremos el tamaño a un 70 por ciento.
Iremos a Imagen/Cambiar tamaño y reduciremos en un 70%

Nuevo muestreo con Tamaño inteligente - seleccionado
Bloquear proporciones - seleccionado
Cambiar tamaño de todas las capas - seleccionado



Edicion/Copiar
Iremos a nuestro lienzo
Edicion/Pegar como nueva capa
Ya puedes cerrar tu tube, no guardes cambios.


Paso 7

Rotaremos nuestra imagen para que quede en la misma
orientacion del frame, usaremos los mismo valores
utilizados en el paso 4.

A continuacion llevaremos esta capa debajo de la
capa de nuestro frame, iremos al menú
Capas/Organizar/Bajar


Con la herramienta Mover, moveremos nuestro tube
de modo que quede como en la imagen.


Paso 8 - Opcional

Nota: Si nos queda la esquinita del tube, saliendo
del frame, con nuestra herramienta borrador,
borraremos el excedente usando los siguientes valores:
Redondo, Tamaño 32, dureza 100, Espesor 100, Opacidad 100,
Nitidez 100





Paso 9


Abriremos:

Disyas_COJ_TB2
Disyas_COJ_G1

En nuestra imagen Disyas_COJ_G1, iremos a Edicion/Copiar
Regresemos a nuestro lienzo y vayamos a la capa del frame
Edicion / Pegar como nueva capa

Reduciremos un poco el tamaño de nuestro regalo,
lo haremos en un 80%, para ello iremos a:
Imagen/Cambiar tamaño, usaremos los siguientes ajustes:
80%

Nuevo Muestreo con Tamaño inteligente - seleccionado
Bloquear proporciones - seleccionados
Importante, NO selecciones "Cambiar tamaño de todas las capas"

Con nuestra herramienta Mover, acomodaremos nuestra
caja de regalo en la posicion que se muestra en la
imagen terminada.


Paso 10

Iremos a la imagen Disyas_COJ_TB2,
Edicion/Copiar.
Regresamos a nuestro lienzo
Edicion/ Pegar como nueva capa

Reduciremos nuestro osito también,
usando los ajustes que usamos con la cajita de regalo en el Paso 9.

Pasaremos nuestro osito detrás del regalo, para
ello iremos a Capas/Organizar/Bajar

Ahora, con tu herramienta Mover, coloca el osito en
posicion como se muestra en la imagen.

Paso 11

Aplicaremos sombra con los mismos valores usados en el
paso 5. La aplicaremos en el osito y en el regalo.


Paso 12

Abriremos el Disyas_COJ_Tag1
Edicion/Copiar
Iremos a nuestro lienzo
Edicion/Pegar como nueva capa

Rotaremos la tag como hicimos con el frame y el tube,
usaremos los mismos valores empleados con
anterioridad en el paso 4, solo que en esta
ocasion en lugar de rotar a 25º, lo haremos a 35º.

Aplicaremos sombra con los mismos valores usados.

Paso 13

Ahora añadiremos el texto:

"Feliz Navidad"

Pon en tu color de primer plano #f6ed8e
Pon en tu color de fondo #961218

Ahora, con tu herramienta texto y los siguientes ajustes,
escribiremos el texto "Feliz Navidad":



Fuente: Brush Script
Tamaño 54
Estilo: Bold
Alinear : centrar
Ancho del trazo: 1


Nota: puedes elegir otra fuente. Segun el tipo de
fuente que utilices, los ajustes pueden variar.

Iremos a nuestra capa de texto, daremos clic
derecho y seleccionaremos: Convertir en capa de trama.

Rotaremos el texto usando los valores que usamos
para rotar el frame.


Paso 14

Aplicaremos a nuestra fuente sombra, usando los valores
utilizados en el paso 4.

Aplicaremos tambien en nuestro texto un poco de bisel
interior, para ello iremos a
Efectos/Efectos 3D/Bisel interior
con los siguientes ajustes:

Biselado 2, Ancho 8, Suavidad 53, profundidad 12,
Ambiente 2, Brillo 0, Color blanco, angulo 55,
intensidad 50, elevacion 30

Paso 15

Para finalizar añade el numero de tu licencia del tube,
y tu nombre.
Espero que hayas disfrutado este tutorial, tanto como
yo disfruté haciéndolo.